Stainless steel gauze YS-HEG10

BRAND: Gigahertz Solutions

HEG10 is a finely woven, noncorrosive stainless-steel gauze for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF).

Typical application for the interior and exterior under-plaster in upgraded insulations, in roof areas, at drywall constructions, as flyscreen, for loosely laid, etc.

Width: 100 cm   Length: 25 m roll / by the meter
Attenuation: 40 dB at 1 GHz Mesh width: 1.0 mm
Wire diameter: 0.16 mm  Material thickness: 0.32 mm
Open area: 74 %   Weight: 260 g/m².
Color: Silver.   Fire-proof material, A1 according DIN 4102:1994.
Surface conductivity: 0.1 Ohm (square resistance)

  • - In case processing the HEG10 under plaster you should work with a preferably fine and organic filler. Under the floor covering (laminate, parquet, PVC coating, etc.) the HEG10 is being fixed with the adhesive used for the floor covering. For drywall construction and in roof area the mesh elements can be bolt or stapled together. The rule is: Always overlap the single elements at least 5 cm. For grounding use the perforated stainless steel tape ELB by screwing it right across the elements into the surface.  

  • - Due to the highly conductive surface this material can be contacted and grounded easy to shield low frequency (LF) electric fields. For professional grounding we recommend our grounding plug EST for self laying application, or our perforated stainless steel tape ELB for application under-plaster or in drywall constructions.
  • - The shielding attenuation is regularly tested in our own laboratory or by Professor Dipl.Ing. Pauli at the University of the German Federal Armed Forces in Munich due to the standards ASTM D4935-10 and/or IEEE-STD-299-2006. The line in the diagram stands for the radial direction of polarization (both directions, horizontal/vertical) and indicates the attenuation achievable in practice.
Download Maya Catalog